Zhongshan epoxy floor paint commonly used construction tools and equipment

Zhongshan Epoxy Floor Coating is made of solvent-free high-quality epoxy resin and curing agent. The surface is smooth, beautiful, mirror effect, with resistance to strong acid, alkali, salt, oil type media corrosion, strong alkali resistance, wear resistance, pressure resistance, impact resistance, high degree of cleanliness and so on. Applicable to highly clean, beautiful, dust-free, sterile electronic, microelectronics industry, the implementation of GMP standards of pharmaceutical, blood products industry, can also be used for schools, offices, families and other floor.

Zhongshan Epoxy Floor Paint has advanced base surface treatment equipment, painting construction tools and quality control instruments in the construction process. It is a powerful weapon for creating an excellent floor painting project. Zhongshan Epoxy Floor Paint, epoxy floor coating construction tools and equipment commonly used, according to reports, mainly includes the following aspects:

First, the base surface processing equipment

1、Grinding machine: It is equipped with a diamond grinding knife, which is used for surface treatment of concrete, terrazzo, hardened wearable ground, marble and other substrate surfaces.

2. Portable grinding machine: It is used to polish small surface area concrete, terrazzo, hardened wear-resisting ground, marble and other substrate surfaces or corners. It can also be used to remove small areas of old paint and oil layers.

3, milling machine: used for milling remove old paint layer, oil layer and so on.

4, shot blasting equipment: used for large area concrete, terrazzo, hardened wearable ground, marble and other substrate surface shot blasting.

5, vacuum cleaner: remove dust on the ground.

Second, coating construction tools

1. Serrated files, spiked shoes, and nail rollers: Serrated blades are used to apply self-leveling floor coatings, and then roll out with a nail roller to release the air in the film. The partial coating defects can be found before the film is dry. Wear spiked shoes to repair.

2. Flat-bottom scraper: It is used to coat thick ground floor paint such as primer, mortar, putty, etc., and is suitable for scraping on the ground.

3, roller and paint brush: excellent quality, lint-free roller and brush can get a good appearance, usually shorter hair rollers have better operability.

4. Airless spraying machine: It is used for spraying construction floor top paint, high efficiency, easy to obtain good decorative effect, easy to control the paint consumption; must select the spray pump and nozzle according to the paint viscosity and the use period to obtain suitable Fluid pressure and flow. Electric drive or internal combustion engine driven high pressure airless sprayers are widely used due to their good portability.

5, air spray equipment: including air compressor and air spray gun, can be used to spray low viscosity floor coating.

6, mortar mixer, spreader and trowel machine: used for the construction of thick (≥ 3mm) resin mortar, the resin mortar with a uniform spread paving on the floor with a trowel smear.

7, defoaming roller brush: suitable for floor paint construction, can eliminate bubbles, rolling effect is good.

8, flat paint flat mouth, round knife: made of manganese steel, suitable for floor paint, Zhongshan epoxy floor paint construction.

Third, in the coating equipment

1. Large grinding machine: high-efficiency and quick mid-coating grinding equipment.

2, polishing machine and belt machine: with 80 ~ 120 mesh grinding plate and belt, in the paint before the top coat of mortar or putty layer to get a smooth surface; with a thicker (20 ~ 40 mesh) Grinding plates and belts can also be used for simple grinding of concrete and other substrate surfaces.

IV. Inspection and Test Equipment

1. Substrate surface temperature and ambient temperature and humidity meter: Determine the temperature and humidity of the coating environment and the surface temperature of the substrate to determine whether the coating requirements are met.

2, the substrate moisture content measuring instrument: used to determine the substrate moisture content to determine whether the coating requirements.

3. Static Conductivity Tester: It is used to determine the static conductive resistivity of the anti-static floor.

V. Other auxiliary tools

1. Cutting machine and glue gun: used for gap processing, cutting machine is used to cut and modify the gap into "V" shape or trapezoid (width 5-10mm) to facilitate filling and pouring; and glue gun is used Infused with polyurethane elastomer.

2. Weighing and stirring tools: High-precision weighing tools are conducive to the accurate preparation of multi-component flooring coatings, mixing and stirring the coating with an electric stirrer