Zhongshan Epoxy floor paint a good choice for the factory floor materials

    1. Ground treatment: Polishing, repairing, decontamination, dust removal according to ground conditions;

    2, epoxy primer: the use of permeability and adhesion special strong epoxy paint roller coating to enhance the surface adhesion;

    3. Epoxy mortar: Add the appropriate amount of quartz sand with epoxy two-components and coat them with a trowel to reach the required number of layers;

    4. Epoxy putty: Add the epoxy two-component into the appropriate putty powder, use a guillotine knife to evenly apply one or two coats to increase the flatness of the ground;

    5, epoxy paint: with epoxy paint roller coating one to two;

    6. Epoxy topcoat: Use epoxy topcoat to roll and make the floor bright and wear-resistant;

    7. When the floor is put into use: 10-24 hours after painting, the person can be on the front, and after 72 hours, the pressure can be applied.

    In order to reduce the cost of procurement, solvent-borne epoxy floor paints with xylene are used, but it is not known that solvent-based industrial Zhongshan Epoxy floor paints are extremely harmful. It is understood that the so-called benzene poisoning refers to inhalation of benzene vapor through the respiratory tract or skin contact with benzene caused by poisoning. There are acute and chronic points. Acute benzene poisoning mainly produces anesthetic effects on the central nervous system, resulting in coma and muscle twitches; high concentrations of benzene have a stimulatory effect on the skin. Chronic exposure to low concentrations of benzene can cause chronic benzene poisoning and hematopoietic disorders.

    The experts of Meidi Chemical Industry Co., Ltd. recommended to use environmentally-friendly water-based high-performance floor materials as far as possible, such as the beautiful land produced by Tembec, which is comparable to that of oil paints, with better hardness, stronger wear resistance, smooth surface, and bright light. Semi-gloss, matt and many colors are available, and non-slip floor, matt or high-gloss ground can be used. Because it uses water as a diluent, it is fresh, non-toxic, and has no odor, making it in a non-circulating working environment. People do not feel uncomfortable. Environmental protection water-based high-performance flooring materials are the inevitable choice for good factory floor materials!