Zhongshan epoxy floor paint has achieved very good results

   1. In the aspect of corrosion resistance, such as the oil in the machinery factory, the solvent of the chemical plant needs the product to meet the requirements of anti-corrosion. This requires the use of different curing agents to improve the performance of the product. The curing agent is divided into anti-corrosion and temperature resistance. Low-temperature curing and other types require the use of epoxy-modified vinyl ester floor materials to meet special requirements when the requirement for corrosion protection is higher than that for passengers.

   2. Zhongshan Epoxy Floor Paint Under normal use conditions, there are economic ordinary epoxy floor or pressure-resistant mortar epoxy floor paint thickness of 0.5mm-3.0mm, can use about three to five or 10 In the past year, as the thickness increased, the useful life also increased.

   3. Because of the demand of pressure bearing in some factories, there is often a weight of the forklift truck with a load ranging from five tons to ten tons. Therefore, it is necessary to add thickness to the product design, and add quartz sand or corundum to the epoxy floor paint. Aggregate helps to increase the pressure resistance and impact resistance, and effectively meet the requirements of product use.

   Floor paint for industrial production workshops, also known as industrial floor paint, is commonly used epoxy floor paint and polyurethane floor paint. Both types of floor coatings have good chemical resistance, abrasion resistance and mechanical impact resistance. However, due to the fact that the concrete floor is a porous material that absorbs moisture, the tolerance of the polyurethane to moisture is relatively poor, and the construction is inadvertently liable to cause delamination, cracking, and other defects, and the material has a lower payability than the epoxy resin coating. Therefore, when the wear resistance and cleanliness are the main performance requirements, the epoxy floor coating should be selected. When the elasticity requirement is the main performance requirement, the polyurethane resin floor coating should be used.

   Epoxy abrasion resistant floor paints are mostly two-component room temperature curing thick film coatings. Usually, solvent-free epoxy floor paints are called "solvent-free epoxy self-leveling clean and wear-resistant floor coatings. "Coating", commonly known as "epoxy self-leveling floor paint". Domestic development and partial application began in the 1990s. After more than ten years of development and improvement, it has been widely used in GMP certification of domestic pharmaceutical plants and has achieved good results.