Solvent-based epoxy transparent varnish

Solvent-based epoxy transparent topcoat KC-SRH-8030

Overview: is a two-component solvent-based epoxy transparent varnish

Features: Bright and transparent film, with good wear resistance

use:

   Applicable to light industry factory buildings, writing rooms, warehouses, food factories anti-mold brushing, dust-free wall and ceiling finishes, can fully display the substrate background pattern;

  Particularly suitable for colored floor light

Construction conditions It is recommended to use this product at temperatures above 10°C. To avoid condensation, the base surface must be dry and clean, with a relative humidity of less than 75%.

Mix proportions A and B after mixing into a mixing drum

Construction method Apply roller coating, brush coating and spray coating on the dried undercoat

Precautions:

   Solvent-based paint, pay attention to on-site ventilation during construction;

   During construction and curing, if the relative humidity of the air is greater than 75%, the film will lose light and so on.

Storage: Sealed and stored in a cool and ventilated place, moisture-proof, sun-protecting and antifreeze

Shelf life: 12 months

Safety: Use this product with care. Swallowing is harmful or fatal. If swallowing, seek medical attention immediately. Skin, eyes should not touch this product. Always take precautionary measures, fire and explosion protection. The residues should be disposed of in accordance with the safety regulations of the relevant national or local government.

Important statement: The advice and information provided here are sourced from our independent laboratories and are accurate under controlled conditions. However, due to the fact that we cannot directly and continuously control our products during use, we will The advice, recommendations, plans, and materials provided by the company do not assume any direct or indirect liability arising out of the use of the product.