How to extend the use of epoxy floor time and brushing method

There are more and more people using epoxy floors. At the same time, the use of epoxy floors has become more and more widespread. Because the cost of the epoxy floor is higher than that of ordinary cement, it is also troublesome in terms of maintenance, and the cost is also very high. Epoxy flooring is very important to the maintenance of other concrete floors.

     1. Prevent sharp and hard objects from rubbing on the floor surface.

     2. If the floor is stained with chemical substances, remove it immediately.

     3. Grease-like substances should also be cleared immediately after they fall on the floor to prevent slippage.

     4. Epoxy floors are also affected by temperature, and high temperatures can affect the service life of epoxy floors.

     5. Maintaining the cleanliness of the surface of the epoxy floor not only keeps the appearance of the epoxy floor, but also prevents damage to the epoxy floor.

Zhongshan Epoxy Floor Coating Brushing refers to the method of artificially painting the floor with a paint brush to pick up paint. Its advantages are: simple tools, simple construction, easy to grasp, strong flexibility, strong applicability, saving paint; for special locations and narrow areas such as corners, grooves, machine equipment bases, and other construction methods difficult to paint parts, Hand brushing method is often used. Before large-area painting, generally the above-mentioned general position should be brushed 1 to 2 times before the coating, and expand the width of more than 30cm, in order to facilitate the large-area construction lap. Brush coating will not form (paint fog), less pollution to the construction environment, high utilization of paint, and less waste. The short point of brushing is: manual operation, low production efficiency, and labor intensity. For coatings with fast drying and poor leveling, brushing tends to leave traces of brush marks and uneven film thickness, affecting the flatness and decorative effect of the coating. There are many kinds of paint brushes. The materials used to make brushes are: wool, horsetail, wolves, human hair, brown silk, and synthetic fibers. Floor coating construction mainly uses hard bristle brushes, or nylon fibers, to meet the requirements of the QB1103 standard. When selecting a paint brush, it is required that the front end of the paintbrush brush head is neat, soft to the touch, free from broken hair and bristles, free from hair loss, and shakes the paint brush behind the solvent, and the brush head is not separated from the paint brush.

Epoxy floor coating quality depends on the actual experience and proficiency of the operator. Before brushing, all components of the coating must be thoroughly mixed and evenly mixed, accurately prepared and mixed evenly, and filtered to remove foreign particles. Brush coating viscosity requirements are relatively wide, generally 20 to 50s is appropriate, with a special diluent adjustment. The requirements for brushing the floor are: no flow, no wrinkle, no leakage and no brush marks.