Zhongshan Epoxy Floor How to Repair and Process the Base Surface

Zhongshan Epoxy Floor coating has certain requirements for the construction base surface. Therefore, the base surface must be inspected carefully before construction. If there is a problem with the base surface, the base surface needs to be repaired and processed to construct the Zhongshan Epoxy Floor.

1. The unevenness of the base surface: Use the method of water-abrasive grinding to smooth the protruding parts to a flat surface (if the base surface flatness is too bad, beyond the range that can be polished to solve, it is recommended to construct a new cement screed and then construct the epoxy floor in Zhongshan. Coating), remove laitance and allow it to dry naturally. This method can only be used in projects where the construction period is relatively abundant. If the construction period is tight, it is not suitable for use.

2. There is a crack on the base surface: The crack is cut into a V-shaped groove with a cutting machine, the groove is cleaned, and the V-shaped groove is filled with epoxy mortar (solventless epoxy floor paint plus quartz sand).

3, base surface sparse from the shell: use a small hammer to beat the base surface, the base emptying, loose, from the shell and other ground, as far as possible to eradicate, and remove and carefully clean up the surface layer of contaminated construction adhesives and coatings, etc. Clean the floor and remove the uneven ground to repair.

4. Shot Blasting: All shot blasting is performed on the base surface to remove surface loose layers and the corners are treated with a dry sander.

5. Base surface cleaning treatment: Clean up all the garbage on the treated base surface, and then use industry vacuum cleaners to clean the dust. It is necessary to seal the construction site before use, and prevent the quality of the cross construction project from causing damage.

1. Lighter color paint: It can be directly mixed with white paint, and the color paste can be mixed into the paint by a certain proportion. Stirring is added while stirring, and it can reach or be similar after stirring.

2. Black mixed with other colors: black + white = gray; black + red = brown; black + green = dark green; black + blue = cyan.

3. Blue mixed with other colors: blue + white = light blue, sky blue; blue + yellow = medium green; blue + red = purple brown.

4. Yellow mixed with other colors: yellow + white = light yellow, milky yellow; yellow + red = orange red, orange.

After reading the paint color with a little understanding, right? However, this is only a few simple concepts. The actual deployment still requires professionals to operate.