Epoxy floor crust in Zhongshan and its prevention

Zhongshan Epoxy Floor is a high-strength, wear-resistant, beautiful floor, with no seams, solid texture, good chemical resistance, corrosion, dust, easy maintenance, low maintenance costs and so on. According to different application requirements can design a variety of programs: such as thin layer coating, 1-5mm thick self-leveling floor, non-slip wear-resistant coating, mortar type coating, anti-static, anti-corrosion coating.

Zhongshan Epoxy Floor can be roughly divided into: epoxy resin grinding stone floor, epoxy resin sand sand pressure floor, epoxy resin self-leveling floor, epoxy resin mortar floor, epoxy resin flat floor .

Zhongshan Epoxy Floor was used for functional floors from the beginning: such as anti-corrosion, wear-resistant, non-slip, developed to common general industrial floor; in addition to functional requirements, but also has a decorative effect. On the basis of the wide application of industrial floors, with the continuous improvement of people's living standards, they have been promoted and applied in home decorating. Floor paint has become one of the fastest growing industries in China and has attracted everyone’s attention. It can achieve industrial production like cement products. The prospects are even more impressive! Applicable to a variety of venues, such as: factory buildings, computer rooms, warehouses, laboratories, wards, operating rooms, workshops, etc.

Zhongshan Epoxy Floor has strong acid-alkali resistance, abrasion resistance, pressure resistance, impact resistance, mold resistance, waterproof, dustproof, anti-slip, anti-static, electromagnetic wave and other characteristics, bright and diverse colors, easy to clean. It uses a one-time coating process, no matter how large the area, there is no connection seam, but also a dust-free material, with strong adhesion, abrasion resistance, hardness and other characteristics.

In recent years, various advantages of Zhongshan Epoxy Floor Paint have been widely used. However, for some floor paint markets, in the case of open barrels, the skinning phenomenon cannot be completely avoided, but how to make the skinning production Speed and its properties can be controlled within acceptable limits to minimize losses. Here for you to explain in detail the reasons and prevention of Zhongshan Epoxy floor paint crust.

1. Determine the possibility of formation of floor coating in the closed barrel.

2. Determine the speed of crust formation during use after opening the barrel.

      The occurrence of crusting in the floor paint will change the proportion of the coating composition of the floor paint, affect the film forming performance, and cause various other ills of the floor paint coating, resulting in a decline in construction quality. Therefore, efforts must be made to avoid and prevent it. We suggest that the construction unit of Zhongshan Epoxy Floor Paint should pay attention to a few points to prevent unnecessary occurrences.

     (1) Open cans The test specimens are placed in half the depth of the paint cans, opened and often observed until crusting. For the above two tests, it is better to use a sample of known crust nature for comparison at the same time so that crusting can occur at different stages compared to the two. From this, it can be concluded whether the floor paint products will produce crusts. .

     (2) Closed test It is recommended to use a glass bottle with a screw cap, fill the volume of 2 / 3 of the sample, tighten the top cover, put the dark place, can be regularly checked or until the crust formation.