Concrete floor damage repair

  Product introduction / PRODUCT DETAIL

Concrete seal curing agent it is a colorless and transparent liquid, non-irritating odor, non-toxic, non-flammable and strong penetration of industrial floor materials, curing agent does not contain volatile organic compounds, chemical actives, silicides, inorganics Combination.

The product undergoes a complex chemical reaction with effective infiltration and free calcium oxide in the concrete, resulting in a strong molecular structure between the concrete molecules, producing hard substances, making the structure in the concrete more dense, strong, effective sealing of the pores, Precipitation of concrete dust from surface pores is always avoided, resulting in a concrete floor that is dust-free, dense, high-strength, highly wear-resistant and has a marble-like luster, which greatly improves the impermeability, wear resistance, freeze-thaw cycles, and hardness of the concrete. Various performance indicators, the longer the gloss, the better

Concrete seal curing agent floorThe paint construction is based on emery wear-resistant flooring, cement terrazzo, and ordinary cement floors, which makes the floor more bright and enhances the ground hardness. However, the sealant curing agent cannot be applied to the epoxy floor because the service agent of the sealer curing agent is the concrete floor. On the other hand, the sealant curing agent can be used for the construction of the epoxy floor because the ground paint is applied to the ground before the construction of the floor paint. The construction of the sealant curing agent can increase the adhesion of the floor paint very well. For related information, you can check the common questions: "Why Epoxy Floor Construction requires the construction of a concrete sealant before construction? 》

  Performance characteristics / PERFORMANCE CHARACTERISTICS

1. Close the concrete pores, effectively inhibit the external pollutants into the concrete pores

2. Improve the compressive strength of old and new concrete floors

3. Strengthen the surface hardness and wear resistance of new and old concrete

4. Resistance to oxide erosion

5. Inhibiting the erosion of chemicals

6. Reacts with chemicals in concrete to form a gel in the pores

7. Prevent concrete from spalling and spalling

8. Sealed concrete to increase its strength

9. The marble floor shines on the concrete floor after mechanical light collection. The longer the gloss is, the better the gloss will be.

  Applicable industry / APPLICABLE SCOPE

1. New and old concrete, wear-resisting ground of aggregate and cement mortar surface, etc. The surface of the building materials with cement as the base, where there are wear-resistant, dust-free, increased strength, impermeability, durability, easy to clean concrete floor requirements Can be used. Such as food processing, automotive industry, electronics industry, parking lots, stadiums, shopping malls, airports, and terminals.

2. Fiber-reinforced concrete floors, the effectiveness of the concrete seal curing agent will not be reduced due to the use of the combined fiber (glass fiber, steel fiber, polypropylene fiber), seal curing agent will still play a protective seal on the polished concrete surface. Hardening and dustproof effect.

3. Wear-resistant aggregate concrete floor, the use of sealed curing agent on the aggregate of quartz, dark-colored rock, metal filler does not have any effect, but it can harden part of the cement, making the ground more wear-resistant, sealed dust-free.

4. The concrete floor of the aggregate dyeing system. The aggregate dyeing system is composed of special quartz sand, high-quality aggregates, and ordinary portland cement with inorganic pigments (pigments), which will not hinder the penetration of the concrete seal curing agent.

  The inevitability of the birth of concrete seal curing agent

Ordinary concrete is a man-made stone that is made of cement, gravel or pebbles, sand, and water, and has been solidified. This man-made stone is a combination of solid, liquid, and gas, so it is inherently prone to defects such as: cracks, damage, abrasion, leakage, corrosion of steel bars, and deformation of structural appearance.

Most of the diseases and defects of concrete buildings are exposed on the outer surface of the structure. The causes of some diseases are relatively simple. Only by careful inspection and mapping of the shape, scope, and degree of disease, can the analysis be clear and make judgments. However, in fact, some disease conditions are more complicated and there are many causes. It is necessary to carry out multi-faceted inspections, tests, or investigations on the design and construction data of projects in conjunction with specific engineering conditions. After a comprehensive analysis, we can get a clearer understanding and Appropriate assessments, in fact, have very little lack of professional knowledge and field experience in China's testing system.

Therefore, the birth of the concrete sealing curing agent is a good way to prevent these problems, and it is well-filled in the lack of talent in the detection system.